PENTART PAINTING / COLOURING

ACRYLIC PAINTS

PRIMERS / BONDING

LIQUID WATERCOLOURS

CONTOURING PAINTS

PIGMENTS

TRANSFERERS

ACRYLIC PAINTS

Pentart Cream Acrylic Paint

Pentart - Cream Acrylic Matte Paint Set - 10 Colours

$29.95

Add To Cart

PRIMERS / BONDING

Pentart Primer Paste

Normal: Water-based primer paste for preparing the surface for further decoration or creating structures. Paint or other effect material adheres better to the treated surface. Smooth, creamy texture. It can be used with stencils and applied with a painter's knife.
Soft: Water-based, white, creamy paste for preparing the surface for further decoration or creating structures. Paint or other effect material adheres better to the treated surface. It has a very smooth texture. It can be sanded, so its use is especially recommended for furniture and wooden objects.

Pentart Bonding Primer

Water-based paint for priming hard-to-paint surfaces, which ensures strong adhesion between the surface and the coating. Tested surfaces: laminated furniture board, wood, glass, glazed ceramic, tile, plastic, aluminum, copper, zinc, enamel, steel, iron, rusty metal. Easily spreadable, material with excellent spreadability. Can be sanded after drying. Any Pentart paint can be applied to the surface coated with the adhesive bridge. Its adhesion-enhancing effect was confirmed by an independent accredited laboratory.

Pentart Primer for Dekor Paint

Water-based, transparent primer for surface preparation or sealing of previously painted surfaces. The primer seals the surface, so that the pigments in the previous paint layers cannot float to the top of the layer, the dissolution can be prevented. Its use is especially recommended before the transformation of furniture.

LIQUID WATERCOLOURS

Pentart Liquid Watercolours

Water-based paint with a high concentration of dyes for watercolor technique. Colors can be mixed and blended, and diluted with water to make them lighter. Use it with a watercolor brush, refillable brush, spray or drip directly from the tube.

CONTOURING PAINTS

Pentart Contour Liners

Water-based, universal, dense paint that can be used on any surface to draw, highlight, or create 3D decorations.
Iron the pattern on textile (synthetic composition max.: 20%) from the reverse side, through baking paper, on cotton level approx. for 30 seconds, so it can also be washed in a washing machine (with a gentle program, inside out).
In the case of glass and porcelain, allow a drying time of 24 hours, then burn the object in an oven at 100°C for 30 minutes.
Afterwards, the item can be cleaned in the dishwasher (use the eco program).

PIGMENTS

Pentart Pigment Paste

Water-based pigment concentrate for colouring non-transparent water-based systems such as paints and pastes. The pigment has a very intense colouring effect, so it is added gradually, drop by drop. Recommended e.g. for colouring Expand paste, fibre paste or Decor Clay.

Pentart Resin Tint

Covering (non-transparent) colorant that can be used with any Pentart two-component resin system, for example Super glass resin. Add a few drops of coloring to the already mixed resin. Use a maximum of 5% colorant in relation to the measured resin. The colors will be extremely vivid.

Pentart Velvet Powder

A particularly fine powder that easily adheres to paints or pastes that are still wet. It forms a velvety, soft surface. Relocatable hobby glue and double-sided adhesive tape are especially recommended

TRANSFERERS

Pentart Express Transfer Solution

Solvent-based solution for transferring laser-printed images onto smooth, porous surfaces. Place the printed image face down on the surface. When writing, we first mirror the image.
Dip an ear cleaning stick into the solution and gently soak the image from the back.
After that, gently rub the entire image with a wooden spatula or metal spoon. Remove the paper and fix the image by varnishing or, in the case of textiles, by ironing (for 30 seconds, on the cotton level, from the back).

Pentart Transfer Pen

Solvent-based solution for transferring laser-printed images onto smooth, porous surfaces. The pen can be transferred easily, quickly and precisely, it is excellent for small, delicate works. Place the printed image face down on the surface. When writing, we first mirror the image. Use the pen to gently transfer the image from the back. After that, gently rub the entire image with a wooden spatula or metal spoon. Remove the paper and fix the image with varnish. In the case of textiles, after the transfer, smear the pattern with a textile medium, then fix it by ironing (for 30 seconds, on the cotton level, from the back side).

Pentart Image Transfer

Water-based universal transfer gel with which laser-printed images can be transferred to any surface. In the case of textiles, glass and porcelain objects, apply alayer of image transfer on top of the image. Afterwards, the decorated textiles can be ironed, and the glass and porcelain objects can be washed after drying.